The correct use of toilet cleaner lies in applying it along the wall, allowing it to react, and using it alone, which can maximize its cleaning power and completely avoid safety risks.
Standard cleaning steps
Pre treatment: First, lightly press the toilet flush button to moisten the inner wall, then use the toilet brush to lower the water level in the trap to avoid diluting the medicine with a large amount of water.
Accurate placement: Place the toilet cleaning liquid bottle close to the glaze of the toilet, slowly squeeze it along the inner wall, and focus on covering areas with heavy urine stains such as the water level line, the edge of the drain, and the bottom groove. Do not pour it directly into the water surface.
Static reaction: Cover the toilet seat and let it sit for 10-15 minutes, allowing the acidic components to fully decompose stubborn stains such as urine alkali and scale, without the need for immediate scrubbing.
Brushing and rinsing: Use a toilet brush to thoroughly scrub the gaps on the inner wall, then rinse with water and use the remaining liquid to wipe the edges of the toilet seat and cover. After rinsing completely, wipe dry.
The safety red line that must never be touched
It is strictly prohibited to mix cleaning agents: they must not be mixed with chlorine containing products such as 84 disinfectant and bleach. When they meet, they will instantly produce highly toxic chlorine gas, which can irritate the respiratory tract in mild cases and even cause pulmonary edema and suffocation death in severe cases; If it needs to be used sequentially, it must be done at least half an hour apart and the windows must be opened for ventilation throughout the entire process.
Do not mix with alkaline cleaning agents: Do not mix with alkaline products such as dishwashing detergent and soap, as they will cause neutralization reactions and directly render the cleaning effect of the toilet cleaner completely ineffective.
Take personal protective measures: When operating, be sure to wear rubber gloves and masks, and if necessary, wear goggles to avoid direct contact of the original solution with the skin and eyes, and to prevent corrosion by acidic components.
Other key usage details
Limited applicable materials: Only suitable for ceramic toilets and tile surfaces, absolutely not for marble, cement floors, aluminum products, or wooden floors. Strong acidic components can corrode the surfaces of these materials, causing irreversible damage.
Control usage frequency: It is not recommended to use it frequently every day. Long term frequent use will wear down the toilet glaze, make the surface rough, and make it easier to hang dirt. Deep cleaning 1-2 times a week is sufficient for daily use.
Standardized storage: Keep in a high place or locked cabinet that is completely out of reach of children and pets, away from food and beverages, and do not use beverage bottles for packaging to avoid the risk of accidental ingestion.
